|
SPECIAL
APPLICATION PUMP SYSTEMS : Continuous Infusion (Push-Pull) and Dual Syringe Pump |
|
CONTINUOUS OPERATION
DISPENSING SYSTEM (Reciprocating / Push-Pull) |
|
Using two NE-1000 pumps
attached with a cable, one pump will infuse while the other pump
refills. When one pump changes direction, the other pump
changes direction.
Attach each of your
syringes to a dual check valve, and the outputs with a 'Y' connector and
you have a continuous infusion system. |
|
DUAL SYRINGE PUMPS SYSTEM |
|
By changing one setting on
both pumps, both pumps will then operate in the same direction.
Disconnect the cable and
you now have two independent syringe pumps. Plus: each pump can
hold a different size syringe and be set to a different flow rate. |
|
Description:
* Holds 2 syringes up to 60 cc
* Continuous infusion mode allows one pump to infuse as other withdraws
* Dual pump mode allows for simultaneous operation with one pump mirroring the second pump
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Includes all the advanced functions and programming features of the NE-1000 family
Features Exclusive to Dual Pump System:
* Utilizes specialized dual pump sync cable kit to synchronize both pumps, a command on one pump will update the other on the fly.
* Includes: 2 NE-1000 programmable single syringe pumps, sync cable kit, two manuals, and two power supplies
* Disconnect the cable kit and you have two independent syringe pump |
