NE-300 Infusion only, simple syringe pump

Similar to the NE-1000 but without programmability, encoder, computer interface or withdrawal capabilities.

 Features:

• Infusion only of single syringe up to 60 cc
• Pumping rate of 0.073 microliter/ hour with a 1 cc syringe to 1500 ml/ hour with a 60 cc syringe
• Display of infused volume
• Non-volatile memory of all operating parameters
• Power failure mode: restarts the pumping parameters after a power interruption
• Unbeatable price

NE-300 Specifications:

Parameter	Value
Syringe Sizes	up to 60 cc
Syringe inside diameter range	0.100 to 50 mm
Number of syringes	1
Motor type	Step motor
Motor steps per revolution	400
Microstepping	1/8 to 1/ 2 depending on motor speed
Advance per step	0.2126 to .8504 micron depending on motor speed
Motor to drive screw ratio	15 / 28
Drive screw pitch	20 revolutions / inch
Voltage at DC connector	12 VDC at fill load
Amperage	750 mA at full load
Power Supply Type	Unregulated linear external wall adapter
CSA approved	yes
Power Supply output rating	12 V DC @ 800 mA
Dimensions	8.75 X 5.75 x 4.5 inches
Weight	3.6 lbs.
Maximum speed	3.7742 cm / min
Minimum speed	0.004205 cm / hr
Maximum pumping rate	1257 ml / hr with a 60 cc BD syringe
Minimum pumping rate	0.73 microliter / hr with a 1 cc BD syringe
Maximum force	35 lbs at minimum speed, 18 lbs at maximum speed

Click here for a list of part numbers or here to request a Canadian price list