| EXAMPLE
APPLICATIONS |
| CONTINUOUS OPERATION DISPENSING SYSTEM Quickly and economically create a continuous operation dispensing system with 2 pumps in reciprocating operation. With just an automation cable and a valve system, the pumps can be synchronized to infuse while the other is refilling, and start and stop simultaneously. |
| AUTOMATED DISPENSING SYSTEM The YA-12 can be setup for an automated dispensing system which dispenses a set volume after a programmed time delay. Then after each dispense, a small volume can be sucked back to prevent dripping. |
| A multiple chemical dispensing application can be implemented with multiple pumps. The pumps can be configured to send signals between them to synchronize the dispense and react to changes in sensors.
|
| Setup an infusion/withdrawal dispensing system to automatically synchronize itself after a power failure by attaching a refill sensor. |
| Pre-program an entire production shift's dispenses on an automated production line. Each dispense can be a different volume and flow rate. Change flow rates during dispenses. Synchronize the start of each dispense with an external signal from other equipment, the operator pressing the 'Start' button, pressing a foot switch, or automatically after a time delay. Have the pump sound a beep to alert the operator at any time.
|
| Prevent dripping after a dispense by programming a volume to be sucked back after each dispense. |
