Home ] Up ] Syringe Heater ]

 

Accessories

Up
Syringe Heater

A C C E S S O R I E S

 

ORDERING INFORMATION:

Canadian prices  -   August  2008

PRODUCT #

D E S C R I P T I O N 

PRICE  $$  CDN

Pump-to-PC Primary Network Cable

- Allows full control over syringe pumps through your computer
- Adapters fit into 9-pin and 25-pin serial port
- Utilizes the RS-232 communications port of syringe pump
- Available in 7' and 25' length cable
- Quick and simple setup

CBL-PC-PUMP-7

   RS-232 Pump network primary cable,  7ft.

$16.00

CBL-PC-PUMP-25

   RS-232 Pump network primary cable, 25 ft.

$18.00

Pump-to-Pump Secondary Network Cable

- Allows networking of two or more syringe pumps to a single computer
- Quick and simple setup
- Utilizes the RS-232 communications port of syringe pump
- Available in 7' and 25' length cable
- Requires first pump to be connected with primary network cable

CBL-NET- 7

   RS-232 Pump network secondary cable,  7 ft

$2.00

CBL-NET- 25

   RS-232 Pump network secondary cable, 25 ft.

$5.00

Dual Pump Plumbing Kit

For use with our continuous infusion system or dual infusion system

-  Provides a dual check valve for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line

-   The kit is pre-assembled, all you need to do is plug in the syringes

-  Each dual check valve uses 6" of 1/8" tubing to connect to a Y connector, one for reservoir  and one for output; each Y-connector has 5' of tubing to make connections to your application. Two 60cc Terumo syringes are included

-  Individual parts are also available

P-DKIT

Dual Pump Plumbing Kit

$22.00

Pump Synchronization Cable

* Used for creating a continuous infusion system or dual infusion system
* Synchronize pumping direction of two syringe pumps so that they change directions, start, and stop as one unit
* Utilizes the TTL logic port on syringe pump
* 7' cable
* Quick and simple setup

CBL-TTL-1

   Pump Synchronization Cable

$22.00

"Lockout Disable" Key

* For use with the syringe pump's "Lockout Mode"
* Prevent unauthorized or accidental changes to the settings by locking the keypad
* The "Lockout Disable" key unlocks the keypad and allows settings to be changed
* Utilizes the TTL logic port on syringe pump
* Quick and simple setup

ADPT-LOCKOUT

  "Lockout Disable" key

$10.00

NOTE:
Pump network primary cables are for the first pump attached to the computer. Use secondary cables for additional pumps on the network.

 
Home Up Products Search Feedback Catalog request New Products Confidentiality Policy
Click here to send questions or comments about this web site.
Copyright © 2007 Bio-Lynx Scientific Equipment Inc.
Last modified: May 15, 2007