| |
| TTL
LOGIC CONTROL INTERFACE |
| Designed for the real-world. Control inputs are software filtered to prevent false signals due to ringing and glitches. This is especially important when mechanical relays, such as foot switches are used. |
* Control the pump from a foot switch or timer.
* Output signals can be used to switch a valve from an output to an input reservoir.
* Pumping direction control
* Programmable output signal
* Programmable responses to input signals
* Configurable start and stop trigger:
* Start or stop the pump on each contact closure to ground. For example, a foot switch.
* Start the pump on closure to ground and stop the pump on opening the connection. For example a timer relay that starts the pump whenever closed and stops the pump whenever open.
* Only start the pump on each contact closure to ground. For example, a laboratory animal trained to press a lever can receive a drug dosage from the pump and the pump will not stop or deliver another dosage until it is permitted by the pumping program entered by the user
* Configurable trigger input:
* Edge trigger: Starts or stops the pump, such as from a foot switch
* Level trigger: Start or stops the pump, such as from a timer or relay control
* Start only trigger: Edge trigger will only start the pump, such as from a lab animal trained to press a lever to receive a dosage.
|
