| MECHANICAL
& ELECTRICAL * |
| Syringe sizes: |
Up to 60 cc |
| Number of syringes: |
1 |
| Motor type: |
Step motor |
| Motor steps per revolution: |
400 |
| Microstepping: |
1/8 to 1/2 depending on motor speed |
| Advance per microstep: |
0.2126 µM to 0.8504 µM depending on motor speed |
| Motor to drive screw ratio: |
15 / 28 |
| Drive screw pitch: |
20 revolutions/" |
| DC connector: |
2.1 mm, center positive |
| Voltage at DC connector: |
11V DC at full load |
| Amperage: |
750 mA at full load |
| Power supply type: |
Unregulated linear external wall adapter, country and
power source specific |
| Power supply output rating: |
10V DC @ 1000 mA |
| Dimensions: |
8 3/4"x 5 3/4"x 4 1/2" High (22.86cm x
14.605cm x 11.43cm) |
| Weight: |
3.6 lbs. (1.63kg) |
| Allen Wrench |
3/32 Hex |
| OPERATIONAL
* |
| Maximum speed: |
5.1005 cm/min |
| Minimum speed: |
0.004205 cm/hr |
| Maximum pumping rate: |
2100 ml/hr with a B-D 60 cc syringe |
| Minimum pumping rate: |
0.73 µl/hr with a B-D 1 cc syringe |
| Maximum force: |
35 lbs. at minimum speed, 18 lbs. at maximum
speed |
| Number of Program Phases: |
41 |
| RS-232 pump network: |
100 pumps maximum |
| RS-232 selectable baud rates |
300, 1200, 2400 ,9600, 19200 |
| Syringe inside diameter range: |
0.100 to 50.00 mm |
